应用Isight的复合材料桁架结构优化设计

轻质复合材料及其结构以其优异的力学性能在航天航空飞行器上得到了广泛应用。考察玻璃纤维/环氧复合材料方形截面桁架在典型弯曲载荷工况条件下的非线性结构承载性能。采用Isight集成平台对桁架结构进行多参数优化设计,获得满足结构刚度和承载性能要求的最轻质桁架结构的几何参数,并分析最优化结构在载荷作用下的结构非线性响应行为。结果表明采用Isight平台对桁架结构进行多参数优化设计具有较高的效率和可信度。     

合成分队双层主从决策模型研究

针对合成分队不同指挥层级之间的决策交互优化问题,提出了基于主从决策的双层武器目标分配模型。该模型能够体现上下指挥层级之间交互式决策协调优化的特点:上层目标为主攻方向我方遭受威胁最小,下层目标为对敌打击最大。结合合成分队作战决策的特点和要求,提出了一种求解该模型的改进型粒子群优化算法。仿真结果表明,该模型合理有效,改进的求解算法能够获得满意解。     

Mean residual life of coherent systems consisting of multiple types of dependent components

Mean residual life is a useful dynamic characteristic to study reliability of a system. It has been widely considered in the literature not only for single unit systems but also for coherent systems. This article is concerned with the study of mean residual life for a coherent system that consists of multiple types of dependent components. In particular, the survival signature based generalized mixture representation is obtained for the survival function of a coherent system and it is used to evaluate the mean residual life function. Furthermore, two mean residual life functions under different conditional events on components’ lifetimes are also defined and studied.     

满足大动压模拟要求的试验弹道优化设计

为了解决弹道导弹在高海拔发射场进行飞行试验时的大动压检验问题,提出一种模拟大动压条件的试验弹道设计方法。针对发射场的实际特点,建立残骸再入的动力学模型与落区边界模型;将大动压模拟条件转化为过程约束,提出一种主动段联合优化策略。基于自适应模拟退火算法,分别设计了三组满足不同大动压模拟条件和各项约束的试验弹道,并给出了对应的落区调整方案,验证了该方法的可行性。设计结果表明,最大动压主要出现在一级,一级最大负攻角增加,则最大动压也明显提高;同时调整发射方位角和二、三级程序角可以保证试验弹道满足弹头落点约束条件。     

高超声速飞行器低可探测性滑翔弹道优化方法

为进一步提高高超声速飞行器的突防性能,提出高超声速飞行器低可探测性滑翔弹道优化方法。考虑飞行器180°×360°方向的雷达散射截面,针对原数据尖峰多、收敛难的难题,运用高斯滤波法对其进行预处理,既不改变原数据趋势又加以平滑,提高优化问题收敛性能。为使计算所用雷达散射截面数据具备较强的保真性,采用三次样条插值方法调用离散数据计算实时雷达散射截面。完成了高超声速飞行器低可探测性滑翔弹道优化问题的建模,以探测概率为目标函数,运用hp自适应Radau伪谱法优化求解,采用逐步计算策略进一步提高优化效率和收敛性能。与传统最短飞行时间弹道对比表明,该方法有效降低了飞行器被雷达发现的概率。     

Layers of Experiments with Adaptive Combined Design

In the field of nanofabrication, engineers often face unique challenges in resource‐limited experimental budgets, the sensitive nature of process behavior with respect to controllable variables, and highly demanding tolerance requirements. To effectively overcome these challenges, this article proposes a methodology for a sequential design of experiments through batches of experimental runs, aptly named Layers of Experiments with Adaptive Combined Design (LoE/ACD). In higher layers, where process behavior is less understood, experimental regions cover more design space and data points are more spread out. In lower layers, experimental regions are more focused to improve understanding of process sensitivities in a local, data‐rich environment. The experimental design is a combination of a space‐filling and an optimal design with a tuning parameter that is dependent on the amount of information accumulated over the various layers. The proposed LoE/ACD method is applied to optimize a carbon dioxide (epet‐CO2) assisted deposition process for fabricating silver nanoparticles with pressure and temperature variables. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 127–142, 2015     

Model parameter estimation and residual life prediction for a partially observable failing system

We consider a partially observable degrading system subject to condition monitoring and random failure. The system's condition is categorized into one of three states: a healthy state, a warning state, and a failure state. Only the failure state is observable. While the system is operational, vector data that is stochastically related to the system state is obtained through condition monitoring at regular sampling epochs. The state process evolution follows a hidden semi‐Markov model (HSMM) and Erlang distribution is used for modeling the system's sojourn time in each of its operational states. The Expectation‐maximization (EM) algorithm is applied to estimate the state and observation parameters of the HSMM. Explicit formulas for several important quantities for the system residual life estimation such as the conditional reliability function and the mean residual life are derived in terms of the posterior probability that the system is in the warning state. Numerical examples are presented to demonstrate the applicability of the estimation procedure and failure prediction method. A comparison results with hidden Markov modeling are provided to illustrate the effectiveness of the proposed model. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 190–205, 2015     

单像自标定的迭代优化方法

针对基于灭点的单像自标定方法精度不高的局限性,利用影像中的灭点和椭圆几何约束信息,提出一种迭代优化的单像自标定方法。根据极点-极线关系及其表示的正交性,由影像中的椭圆曲线及其所在平面的灭线确定一组正交共轭灭点对。利用这些正交共轭灭点对建立关于主距和主点的非线性模型,以主距的方差最小作为优化准则,并选用多个位置作为主点的初始值进行多次迭代优化估计,获得主距和主点的最优结果。仿真影像和真实影像实验结果表明,该方法能够有效地实现单像自标定。与基于灭点的摄像机标定方法相比,该方法能够获得更为满意的标定结果。     

某自动补弹系统翻转机构的优化设计

根据自动补弹系统中翻转机构的功能和设计要求,设计了一种新型的翻转机构,使用ADAMS软件对其进行优化设计,得到相应的曲线和较为理想的结果参数。结果表明通过对翻转机构的优化设计,为自动补弹系统翻转机构的改进设计起到指导作用,该方法对自动补弹系统中其他机构的优化分析也具有一定参考价值。     

基于单元故障模式的水下恒流远供系统可靠性分析方法

以水下单元的短路/开路故障模式为基础,提出了一种分析缆系海底观测网络恒流远供系统可靠性的方法。根据系统供电和结构特性,将系统分成不同的供电链路和链路段。详细研究了处于不同位置的各种水下单元发生故障时,对链路和观测设备的供电状态的影响。归纳了导致系统和各链路无法正常导通、观测设备无法得到供电的状态情况,分析了不同故障状态发生的概率,进而得出了求解系统、供电链路与供电设备的供电可靠度的方法。通过算例分析,进一步梳理了3种供电可靠性的共性规律,说明在设计和建设恒流远供系统时,应综合须考量这3种供电可靠性。